The Shure MX184 Miniature Supercardioid Lavalier Microphone is a professional wired electret condenser microphone designed for clear, focused speech reproduction in corporate presentations, houses of worship, lectures, broadcast production, conference rooms, and installed sound systems. Part of Shure's Microflex series, the MX184 combines a discreet clothing-mounted design with directional sound pickup, interchangeable microphone cartridges, and a balanced output for professional audio applications.

Unlike omnidirectional lavalier microphones that capture sound equally from all directions, the MX184 features a supercardioid pickup pattern that emphasizes the speaker's voice while reducing unwanted ambient sound from the sides. This makes it particularly useful in acoustically challenging environments where controlling background noise and maintaining speech intelligibility are important.

The MX184 includes an inline belt-clip preamplifier with a balanced XLR output for connecting to professional mixers, microphone preamplifiers, and installed audio systems that supply phantom power.

Supercardioid Pickup for Focused Speech Reproduction

The MX184 features a miniature supercardioid condenser cartridge with a nominal 115-degree pickup angle at the −3 dB points.

This directional pattern concentrates sensitivity toward the front of the microphone while reducing sound pickup from the sides, helping improve separation between the speaker's voice and surrounding noise.

For lecturers, presenters, clergy, and other speakers, this focused pickup can improve vocal clarity in rooms with competing sound sources.

Because supercardioid microphones have a narrower pickup pattern than omnidirectional models, proper microphone placement is important. The capsule should be oriented toward the speaker's mouth for the most consistent results.

Its 50 Hz–17 kHz frequency response supports detailed, natural speech reproduction across a wide range of professional applications.

Interchangeable Microflex Condenser Cartridges

The MX184 uses Shure's interchangeable Microflex cartridge system, allowing the microphone's pickup pattern to be changed without replacing the complete lavalier assembly.

The included supercardioid cartridge can be exchanged for compatible Microflex cartridges when an application requires a different pickup pattern.

Compatible replacement cartridges include:

Replacement cartridges are sold separately.

This interchangeable design makes the MX184 a flexible choice for commercial audio installations where microphone requirements may change over time.

Balanced XLR Output with Inline Preamplifier

The MX184 includes an inline belt-clip preamplifier with an active balanced, transformerless output.

This configuration provides improved immunity to electrical interference and unwanted noise when connected to professional audio equipment using balanced microphone cabling.

The preamplifier features a standard three-pin XLR output and requires 11–52V DC phantom power from a compatible mixer, microphone preamplifier, or DSP system.

An internal gain adjustment allows operation at the standard 12 dB gain setting or a reduced 0 dB setting. This provides additional flexibility when accommodating different sound pressure levels and system requirements.

The supplied preamplifier also incorporates RF filtering to help reduce interference in professional installations.

Discreet Lavalier Design with Flexible Mounting

The miniature MX184 microphone capsule can be attached to a lapel, tie, shirt, or other suitable clothing location for hands-free speech pickup.

Its compact design helps minimize visibility during presentations, video production, and live events while allowing speakers to move naturally.

The supplied rotatable tie clip pivots in 90-degree increments, providing flexibility when positioning the microphone on different garments.

A dual tie clip is also included for applications requiring two microphones, such as redundant microphone setups or dual-miking configurations.

The attached 4-foot shielded cable provides convenient placement of the inline preamplifier while keeping the microphone capsule discreetly positioned.

Snap-Fit Windscreen for Breath Noise Control

The MX184 includes a snap-fit foam windscreen designed to reduce breath noise, plosives, and unwanted air movement.

Shure particularly recommends windscreen use with the directional MX184 cartridge.

The secure snap-fit design helps keep the windscreen in place during normal use without adding unnecessary bulk to the microphone.

Key Features

  • Professional wired miniature lavalier condenser microphone
  • Supercardioid pickup pattern provides focused speech capture
  • Approximately 115-degree pickup angle at the −3 dB points
  • 50 Hz–17 kHz frequency response for clear vocal reproduction
  • Interchangeable Microflex cartridges support multiple pickup patterns
  • Balanced, transformerless output improves noise rejection
  • Included inline belt-clip preamplifier with three-pin XLR output
  • Requires 11–52V DC phantom power
  • Internal preamplifier gain adjustment for different applications
  • Rotatable tie clip pivots in 90-degree increments
  • Supplied dual tie clip supports two-microphone mounting
  • Snap-fit foam windscreen helps control breath noise
  • Four-foot shielded microphone cable with TA4F connection to the preamplifier

Technical Specifications

Specification Details
Manufacturer Shure
Model MX184
Product Series Microflex
Microphone Type Electret condenser
Polar Pattern Supercardioid
Pickup Angle Approximately 115° at −3 dB
Frequency Response 50 Hz–17,000 Hz
Output Impedance 180 ohms
Output Configuration Active balanced, transformerless
Sensitivity −33.5 dBV/Pa (21.1 mV/Pa) at 1 kHz
Maximum SPL 122.7 dB SPL at 1 kHz, 1% THD
Equivalent Output Noise 26.5 dB SPL, A-weighted
Signal-to-Noise Ratio 67.5 dB
Dynamic Range 96.2 dB
Common Mode Rejection 45 dB minimum
Preamplifier Gain 12 dB standard; 0 dB internal adjustment
Power Requirements 11–52V DC phantom power
Current Consumption 2.0 mA
Cable Length 1.2 m (4 ft)
Microphone Cable Connector TA4F, 4-pin female
Preamplifier Output 3-pin XLR
Operating Temperature −18°C to 57°C (0°F to 135°F)
Microphone Finish Black

Audio performance figures are based on Shure's published measurement conditions using the standard preamplifier gain setting. Specifications may differ when the preamplifier gain is internally adjusted.

Included Accessories

  • Inline belt-clip microphone preamplifier
  • Rotatable tie clip
  • Dual tie clip
  • Snap-fit foam windscreen

Recommended Applications

Corporate Presentations and Conference Rooms: Provides focused speech pickup for meetings, training sessions, and professional presentations.

Houses of Worship: Suitable for clergy, worship leaders, and speakers who need hands-free amplification with reduced pickup of surrounding sound.

Lectures and Education: Allows instructors and lecturers to communicate clearly while maintaining a discreet microphone appearance.

Broadcast and Video Production: Offers directional speech pickup for presenters and interview subjects in controlled recording environments.

Installed Sound Systems: Integrates with professional mixers, DSP systems, and microphone preamplifiers equipped with balanced XLR inputs and phantom power.

Theater and Live Events: Provides a discreet microphone solution for speech reinforcement when directional pickup is preferred.

Why Buy the Shure MX184 from Audio Supply?

Audio Supply provides professional Shure microphones and sound system solutions for businesses, schools, houses of worship, and commercial audio installations.

Whether you're replacing an existing Microflex microphone or selecting a directional lavalier for a new installation, Audio Supply can help you identify equipment suited to your application.

Need a Wireless Lavalier Microphone?

The Shure MX184 is designed for wired operation and includes an inline preamplifier with a balanced XLR output.

For applications requiring a supercardioid lavalier microphone that connects directly to a compatible Shure wireless bodypack transmitter, consider the Shure WL184 Supercardioid Lavalier Microphone.

The WL184 provides a similar microphone configuration without the MX184's wired inline preamplifier. Confirm bodypack connector compatibility before ordering.

List price: $400.00
Price: $285.00