The Shure MX418/S Microflex Standard Gooseneck Microphone is a professional 18-inch supercardioid condenser microphone designed for clear, focused speech reproduction in houses of worship, courtrooms, conference centers, lecture halls, and commercial audio installations. Featuring an adjustable gooseneck, interchangeable microphone cartridge, attached XLR preamplifier, and professional mounting accessories, the MX418/S provides dependable audio performance for lecterns, pulpits, and conference tables.

Its supercardioid pickup pattern offers tighter directional coverage than a standard cardioid microphone, helping reduce unwanted sound from the sides and improve speech clarity in challenging acoustic environments.

With a 50 Hz–17 kHz frequency response, balanced transformerless output, and phantom-powered operation, the MX418/S is designed for professional installed sound systems where microphone placement and speech intelligibility are important.

18-Inch Adjustable Gooseneck

The MX418/S features an 18-inch (457 mm) adjustable gooseneck that provides additional reach for lecterns, podiums, pulpits, and presentation tables.

Its extended length allows installers to position the microphone closer to the speaker while keeping the mounting location convenient and unobtrusive.

The flexible gooseneck accommodates different speaking heights and presentation styles, making it particularly useful in shared facilities where multiple people use the same microphone.

Proper positioning helps maintain consistent vocal levels and improves the microphone's ability to reject unwanted surrounding sound.

Supercardioid Pickup for Focused Speech

The MX418/S includes a supercardioid electret condenser cartridge designed to emphasize sound arriving from the front while reducing pickup from the sides.

Compared with the cardioid MX418/C, the supercardioid version provides a narrower primary pickup area. This can be advantageous in rooms with multiple microphones, nearby loudspeakers, or reflective surfaces.

Supercardioid microphones also have a small rear pickup lobe, so correct loudspeaker placement is important when designing a sound reinforcement system.

The microphone's 50 Hz–17,000 Hz frequency response provides natural reproduction of speech, including the detail needed for clear announcements, lectures, presentations, and spoken-word reinforcement.

Interchangeable Microflex Condenser Cartridges

The MX418/S includes a supercardioid microphone cartridge, but its interchangeable Microflex design allows the pickup pattern to be changed without replacing the complete gooseneck assembly.

Compatible replacement cartridges include:

This modular design is particularly useful when meeting-room layouts, loudspeaker positions, or installation requirements change.

The microphone is supplied with its supercardioid cartridge installed.

Attached XLR Preamplifier and Balanced Audio Output

The MX418/S features an attached XLR preamplifier for connection to compatible professional mixers, microphone preamplifiers, and installed audio systems.

Its active balanced, transformerless output helps reduce susceptibility to electromagnetic interference and unwanted noise over professional microphone cable runs.

The microphone requires 11–52 VDC phantom power from compatible equipment.

Unlike the MX418SE models, which use a separate in-line preamplifier and side-exit cable, the standard MX418/S incorporates its preamplifier into the microphone assembly.

This configuration makes the MX418/S a practical choice for conventional lectern and conference-room installations.

Secure Flange and Shock Mount Installation

The MX418/S includes a locking flange mount and shock mounting hardware for installation on suitable lecterns, pulpits, conference tables, and other surfaces.

The locking flange provides a secure mounting arrangement for permanent installations.

The supplied shock mount provides more than 20 dB of isolation from surface-transmitted vibration, helping reduce unwanted noise caused by movement or contact with the mounting surface.

These mounting options allow installers to select an appropriate configuration based on furniture construction, cable routing, and acoustic requirements.

Windscreen and RF Interference Protection

The supplied snap-fit foam windscreen helps reduce breath noise and plosive sounds caused by close speech.

It also provides basic protection for the microphone cartridge during everyday use.

Shure CommShield RF filtering helps reduce interference from nearby mobile devices and other radio-frequency sources.

Combined with the microphone's balanced output and vibration-isolating mounting accessories, these features support reliable audio performance in professional presentation environments.

Key Features

  • Professional 18-inch supercardioid condenser gooseneck microphone
  • Narrow directional pickup for focused speech reproduction
  • Adjustable gooseneck for lecterns, pulpits, and conference tables
  • Interchangeable Shure Microflex microphone cartridges
  • 50 Hz–17 kHz frequency response
  • Attached XLR microphone preamplifier
  • Balanced transformerless audio output
  • Locking flange mount for secure installation
  • Shock mount provides more than 20 dB vibration isolation
  • Snap-fit foam windscreen reduces breath noise and plosives
  • CommShield RF filtering helps reduce interference from mobile devices
  • Requires 11–52 VDC phantom power

Technical Specifications

Specification Details
Manufacturer Shure
Model MX418/S
Series Microflex MX400
Microphone Type Electret condenser
Polar Pattern Supercardioid
Gooseneck Length 18 in. (457 mm) nominal
Frequency Response 50 Hz–17,000 Hz
Sensitivity −33.5 dBV/Pa (21.1 mV/Pa) at 1 kHz
Output Impedance 170 Ω actual; 150 Ω EIA rated
Maximum SPL 122.7 dB SPL at 1 kHz, 1% THD, 1 kΩ load
Equivalent Output Noise 26.5 dB SPL, A-weighted
Signal-to-Noise Ratio 67.5 dB, referenced to 94 dB SPL
Dynamic Range 96.2 dB at 1 kΩ load
Common Mode Rejection 45 dB minimum
Preamplifier Output Clipping Level −6 dBV (0.5 V), 1% THD
Output Configuration Active balanced, transformerless
Output Connector Three-pin male XLR
Preamplifier Attached XLR preamplifier
Phantom Power 11–52 VDC
Current Consumption 8.0 mA
Mounting Locking flange or shock mount
Shock Isolation More than 20 dB
Mute Switch Not included
Logic Input/Output Not included
Operating Temperature −18°C to 57°C
Relative Humidity 0–95%
Included Windscreen Snap-fit foam windscreen

Included Mounting Accessories

  • Locking flange and retainer
  • Shure A400SM shock mount
  • Shure RK412WS snap-fit foam windscreen
  • Isolation ring
  • Mounting hardware and hex wrench

Recommended Applications

Houses of Worship: Capture sermons, readings, and announcements from pulpits and lecterns with focused directional pickup.

Courtrooms: Provide clear speech reinforcement for judges, witnesses, attorneys, and other participants.

Conference Centers: Support presentations and meetings where controlling unwanted room pickup is important.

Lecture Halls: Position the extended gooseneck microphone at podiums and teaching stations.

Council Chambers: Provide professional speech pickup for public meetings and government facilities.

Corporate Presentation Rooms: Integrate a directional gooseneck microphone into permanent audiovisual installations.

MX418/S vs. MX418/C: Which Pickup Pattern Is Right?

The Shure MX418/S includes a supercardioid cartridge that provides narrower front-facing pickup and increased rejection of sound arriving from the sides.

The Shure MX418/C includes a cardioid cartridge that provides a somewhat wider front-facing pickup area, which can be useful when speakers move slightly off-axis.

Both microphones feature an 18-inch adjustable gooseneck, attached XLR preamplifier, interchangeable Microflex cartridges, and professional mounting accessories.

Choosing between the two depends on microphone placement, room acoustics, loudspeaker positioning, and the desired pickup coverage.

Why Buy the Shure MX418/S from Audio Supply?

Audio Supply provides professional Shure microphones and installation accessories for houses of worship, educational facilities, courtrooms, corporate meeting spaces, and commercial audio systems.

Whether you're replacing an existing gooseneck microphone or designing a new sound reinforcement installation, Audio Supply can help you select the appropriate microphone configuration, replacement cartridge, and compatible accessories.

Need a Replacement Microflex Cartridge?

The Shure MX418/S includes a supercardioid microphone cartridge, but its interchangeable design supports alternative pickup patterns.

For a direct replacement, choose the Shure R184B Supercardioid Cartridge.

For broader front-facing coverage, consider the Shure R185B Cardioid Cartridge.

For applications requiring pickup from all directions, the Shure R183B Omnidirectional Cartridge provides another option.

These compatible Microflex cartridges allow you to adapt your existing microphone to different installation requirements without replacing the entire gooseneck assembly.

List price: $445.00
Price: $315.00