| Transducer |
Condenser |
| Polar Pattern |
Cardioid |
| Frequency Response |
50 to 17,000 Hz |
| Output Impedance |
180 ohms actual (EIA rated at 150 ohms) |
| Sensitivity (At 1,000 Hz) |
(open circuit voltage) -35.0 dBV/Pa (17.8 mV) |
| Maximum SPL |
124.2 dB (1 kHz at 1% THD, 1 kilohm load) |
| Equivalent Output Noise (A-weighted) |
28.0 dB SPL |
| Signal to Noise Ratio |
66.0 dB (referenced at 94 dB SPL) |
| Dynamic Range at 1 kilohm load 96.2 dB |
100 dB at 0 gain |
| Common Mode Rejection |
45.0 dB minimum |
| Preamplifier Output Clipping Level |
(1% THD) -6.0 dBV (0.5 V) -12 dBV at 0 gain |
| Polarity |
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector |
| Power Requirements |
11 to 52 Vdc phantom, 2.0 mA |
| Operating Temperature Range |
-18 to 57 degrees C (0 to 135 degrees F) |
| Relative Humidity |
0 to 95% |
| Dimensions |
Microphone: 23.92 x .79" (607.56 x 20.07mm) (L x Diameter) Mounting Flange: 2.62" (66.54mm) in Diameter |
| Weight |
1.82 lbs. (0.82 kg) |
