The Shure UA834V VHF In-Line Antenna Amplifier is a professional low-noise RF amplifier designed to compensate for signal loss in remote antenna installations operating between 174 and 216 MHz. Featuring switchable +6 dB and +12 dB gain settings, the UA834V helps maintain appropriate RF signal levels when longer coaxial antenna cables are required.
Designed for compatible Shure VHF wireless microphone systems, the UA834V connects between a receiving antenna and a wireless receiver or antenna distribution system. Its active amplification compensates for cable attenuation, allowing antennas to be positioned farther from equipment racks while maintaining a properly balanced RF signal path.
The UA834V is suitable for professional wireless installations in theaters, houses of worship, broadcast facilities, auditoriums, and other venues using equipment within its specified VHF frequency range.
Dedicated 174–216 MHz VHF Operation
The Shure UA834V is specifically designed for wireless systems operating in the 174–216 MHz VHF frequency range.
Unlike wideband UHF antenna amplifiers, the UA834V is intended for equipment operating within this VHF band.
Its frequency-specific design makes it suitable for compatible VHF wireless microphone installations requiring remote antenna placement and RF cable-loss compensation.
Important: The UA834V is not intended for UHF wireless microphone systems operating outside 174–216 MHz. Confirm the frequency range of the antenna and receiver before installation.
Switchable +6 dB and +12 dB RF Gain
The UA834V features a two-position gain selector switch that allows installers to choose between +6 dB and +12 dB amplification.
These settings help compensate for signal attenuation introduced by coaxial antenna cables.
+6 dB Gain: Suitable when approximately 6 dB of compensation is required.
+12 dB Gain: Provides additional compensation for longer or higher-loss cable runs.
The appropriate setting should be selected according to the calculated RF cable loss and the receiving equipment's signal requirements.
Excessive amplification can overload RF equipment and reduce wireless system performance.
Shure recommends using the lowest gain setting necessary to compensate for cable loss and maintain reliable reception.
Low-Noise Amplification for Remote Antennas
Remote antenna installations often require longer coaxial cables between the antenna and receiver.
As RF signals travel through coaxial cable, some signal energy is lost through attenuation.
The UA834V provides active RF amplification to compensate for this insertion loss.
By placing the amplifier appropriately within the antenna signal path, installers can maintain a more suitable signal level at the receiver input.
The amplifier cannot eliminate external interference, correct poor antenna positioning, or recover signals that are already unusable at the antenna.
Proper antenna selection, placement, and cable routing remain essential.
Coaxial DC Power for Simplified Installation
The Shure UA834V receives operating power through its coaxial RF connection.
It requires 10–15 V DC bias power supplied by a compatible wireless receiver, antenna distribution system, or suitable antenna bias power source.
This arrangement eliminates the need for a separate power adapter at the amplifier's mounting location.
The UA834V connects using standard 50-ohm BNC RF connections.
Before installation, verify that the receiving equipment can provide the required DC bias voltage and power.
A receiver's BNC antenna connector does not automatically guarantee that it can power an active antenna amplifier.
RF Overload Indicator and Gain Management
The UA834V includes an RF overload LED that alerts installers when the input signal reaches an excessive level.
This feature is useful when adjusting antenna placement and amplifier gain in professional wireless systems.
The amplifier's gain should compensate for cable attenuation rather than simply maximize received signal strength.
For example, if the calculated cable loss is approximately 6 dB, the +6 dB setting is generally more appropriate than the +12 dB setting.
Proper gain management helps avoid receiver overload and supports dependable wireless microphone operation.
Flexible Mounting for Professional Installations
The UA834V features a durable cast-aluminum enclosure with a black painted finish.
Its mounting design supports installation on a suitable microphone stand or with the supplied surface-mount bracket.
This flexibility allows the amplifier to be positioned near remotely mounted antennas or other appropriate locations within the RF signal path.
The compact housing is suitable for permanent AV installations and portable wireless microphone systems.
Shure UA834V Key Features
-
Professional in-line VHF antenna amplifier
-
Designed for 174–216 MHz operation
-
Switchable +6 dB and +12 dB RF gain
-
Compensates for coaxial antenna cable attenuation
-
Low-noise amplification design
-
Two BNC female RF connectors
-
50-ohm characteristic impedance
-
Powered through coaxial DC bias
-
Requires 10–15 V DC operating power
-
RF overload LED indicator
-
Cast-aluminum enclosure
-
Microphone stand and surface-mount installation options
Technical Specifications
|
Specification
|
Details
|
|
Manufacturer
|
Shure
|
|
Model
|
UA834V
|
|
Product Type
|
In-Line VHF Antenna Amplifier
|
|
Frequency Range
|
174–216 MHz
|
|
Gain Settings
|
+6 dB / +12 dB
|
|
Gain Tolerance
|
±2 dB
|
|
RF Connector Type
|
BNC Female
|
|
Characteristic Impedance
|
50 Ω
|
|
Power Requirements
|
10–15 V DC Bias Through Coaxial Connection
|
|
Power Consumption
|
0.60–0.72 W
|
|
Maximum RF Input
|
+5 dBm
|
|
RF Overload LED Threshold
|
-5 dBm ±2 dB
|
|
Input Third-Order Intercept Point (IIP3)
|
Greater Than +10 dBm
|
|
Housing
|
Cast Aluminum
|
|
Finish
|
Black Painted
|
|
Dimensions Without Stand
|
67 × 32 × 112 mm
|
|
Dimensions With Stand
|
108 × 32 × 112 mm
|
|
Weight Without Stand
|
0.28 kg (9.8 oz.)
|
|
Weight With Stand
|
0.42 kg (14.8 oz.)
|
Ideal Applications
Theater and Performing Arts: Compensate for cable attenuation when VHF receiver antennas are remotely positioned in performance venues.
Houses of Worship: Support longer antenna cable runs between compatible VHF wireless equipment and remote antennas.
Broadcast Facilities: Maintain appropriate RF levels in compatible professional VHF wireless microphone installations.
Educational Facilities: Support remote antenna configurations in auditoriums, lecture halls, and multipurpose spaces.
Corporate AV Installations: Provide cable-loss compensation for compatible VHF wireless microphone systems.
Live Sound Systems: Allow flexible antenna placement while compensating for appropriate coaxial cable losses.
Compatibility and Installation Considerations
The Shure UA834V is designed for compatible 174–216 MHz VHF wireless systems that use 50-ohm BNC antenna connections and provide the required DC bias power.
It may be incorporated into suitable antenna distribution installations, including compatible Shure UA844 and UA845 configurations.
Compatibility must be confirmed for the specific receiver, antenna, distribution system, and power arrangement.
The UA834V should not be selected for a UHF receiver simply because that receiver uses BNC antenna connections. The operating frequency and DC power requirements must also match.
Need a 100-Foot Remote Antenna Extension Cable?
For VHF wireless installations requiring longer antenna cable runs, consider the Shure UA8100 100-Foot Coaxial Antenna Extension Cable.
Featuring 50-ohm RG213/U coaxial construction and BNC connectors, the UA8100 provides a professional connection between compatible remote antennas and wireless equipment.
When used in a properly designed 174–216 MHz VHF antenna system, the UA834V can help compensate for coaxial cable attenuation. Select the amplifier gain according to the calculated system loss to avoid excessive RF amplification.
Why Buy the Shure UA834V from Audio Supply?
Audio Supply offers genuine Shure wireless microphone equipment, antenna amplifiers, RF accessories, and professional audio products for live sound, theater, broadcast, houses of worship, and commercial AV installations.
The Shure UA834V provides adjustable RF gain for compatible VHF wireless systems, helping installers compensate for antenna cable loss in properly designed remote antenna installations.