The Shure WL183 is a miniature omnidirectional microphone designed for general recording and sound reinforcement application. The omnidirectional pattern provides a generous pick up at the perimeter of the capsule, enhancing ambient audio pick up while minimizing handling noise. The WL183 features a wide sensitivity and frequency response, reproducing speech with great detail and clarity. The 4 foot (1.2 meter) cable cable terminates to a 4-pin TA4-female connector, compatible with Shure wireless transmitters and power supplies.
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Interchangeable cartridges that provide an optimal choice for each application
- Rotatable tie-clip that pivots in 90 degree increments for placement flexibility
- Supplied snap-fit foam windscreen that controls breath noise and stays on securely
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Supplied dual tie clip holds two microphones for dual miking applications
Recommended for general purpose sound reinforcement, recording, or remote monitoring applications, the WL183 is an omnidirectional lavalier microphone with a 360 degree pickup angle and low handling noise. It has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. Included tie clip can be rotated in 90 degree intervals for placement flexibility
Shure WL183 Omnidirectional Lavalier Microphone:
| Transducer |
Electret Condenser |
| Polar Pattern |
Omnidirectional |
| Frequency Response |
50 Hz - 17 kHz |
| Dynamic Range (Typical) |
102.5 dB |
| Signal-to-Noise Ratio |
Output Noise: 22.5dB SPL |
| Maximum Input Sound Level |
125 dB |
| Power Requirements |
5v DC on Pin 2, Return on Pin 1 (Ground) Provided by Wireless Transmitters |
| Output Impedance |
1800 ohms |
| Output Connectors |
TA4F Mini 4-Pin Connector |
| Pad |
None |
| Low Frequency Roll-Off |
None |
| Dimensions |
Cable Length - 4 feet (1.2m) |
| Weight |
not specified by manufacturer |
