Shure WL185 is a cardioid subminiature lavalier microphone with signal characteristics perfect for general sound reinforcement applications. The cardioid pick up pattern brings adequate rejection of off-axis ambient signal that can cause noise and feedback. The low-profile subminiature design is ideal for applications where the microphone must be concealed. The hardwired 4 foot cable terminates to a 4-pin TA4-female connector which is compatible with Shure wireless transmitters and power supplies.
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Interchangeable cartridges that provide an optimal choice for each application
- Rotatable tie-clip that pivots in 90 degree increments for placement flexibility
- Supplied snap-fit foam windscreen that controls breath noise and stays on securely
- Supplied dual tie clip holds two microphones for dual miking applications
Recommended for general purpose sound reinforcement applications requiring good rejection of ambient noise, the WL185 is a cardioid lavalier microphone with a 130 degree pickup angle. It has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. Included tie clip can be rotated in 90 degree intervals for placement flexibility. Use of windscreen highly recommended.
Shure WL185 Cardioid Lavalier Microphone Specs:
| Transducer |
Electret Bias |
| Polar Pattern |
Cardioid |
| Frequency Response |
50Hz to 17kHz |
| Dynamic Range (Typical) |
102dB |
| Signal-to-Noise Ratio |
18dB SPL (A-weighted) |
| Maximum Input Sound Level |
130dB |
| Power Requirements |
Regulated Nominal 5 Vdc (2 Vdc to 10 Vdc) |
| Output Impedance |
28 ohms |
| Output Connectors |
TA4-Female |
| Pad |
No |
| Low Frequency Roll-Off |
No |
| Dimensions |
Cable length: 4 foot (1.2 meter) |
| Weight |
not specified by manufacturer |
