The D-984VC is a dedicated VCA control module designed for use with the D-901 Digital Mixer. It expands the D-901 Digital Mixer's functions by 20 VCA control inputs, 8 contact inputs, and 8 contact outputs. By the VCA controls from external equipment, this module permits the D-901's gains of 12 inputs and 8 outputs to be controlled. By the contact input controls from external equipment, this module permits the preset memory recall, input/output channel gains, stereo input selection, and channel ON/OFF to be controlled. By the contact output controls Tally outputs can also be provided for external control.
|
VCA Control Input
|
+5 V, GND, Terminal 1 - 20 (12 Input channels, 8 output channels),
RJ45 connector × 4
Control contents: Volume control of each input/output channel
Variable range: - dB to + 0 dB
|
|
Contact Input
|
COM + Terminal 1 - 8: Open voltage: 5 V DC,
short-circuit current: 5 mA, RJ45 connector × 2
|
Control
|
Preset Memory Selection
|
Any preset memory can be recalled.
Control method: No-voltage make of over 100 ms/
No-voltage make single pulse of over 100 ms
|
|
Volume Control
|
Any input/output channel volume can be turned UP or DOWN.
Control method: 1 step variation for no-voltage make single pulse of
over 100 ms
1 step continuous operation for every 70ms for no-voltage
make of over 100ms. Can be reset when at break.
Variable Range: - dB to +10 dB
|
|
Channel
|
Any input/output channel can be turned ON and OFF.
Control method: No-voltage make of over 100 ms/
No-voltage make single pulse of over 100 ms
|
|
Stereo Selection
|
Input channel lines of the D-936R (optional), or the D-937SP
(optional) (4 stereo input module) can be selected.
Control method: No-voltage make of over 100 ms/
No-voltage make single pulse of over 100 ms
|
|
Contact Output
|
COM + Terminal 1 - 8: No-voltage make contact,
contact capacity: 24 V DC, 100 mA,
RJ45 connector × 2
|
|
Finish
|
Panel: Pre-coated steel plate, black, 30% gloss
|
|
Dimensions
|
35 (W) × 119.5 (H) × 178.4 (D) mm
|
|
Weight
|
170 g
|
