The AtlasIED ECM-RACEWY3 is a three-slot power module housing designed for professional audio, video, and commercial power management installations. Built to accommodate up to three compatible AtlasIED ECM power conditioning modules, this modular raceway provides a convenient mounting solution for systems requiring multiple independently powered AC circuits.
Designed for use with compatible AtlasIED ECM-20 and ECM-series power modules, the ECM-RACEWY3 supports installations with up to three separate 20-amp electrical circuits, providing a combined potential capacity of 60 amps across the three circuits when properly equipped and wired.
Its durable black-painted construction, removable mounting tabs, and included blank plates make the ECM-RACEWY3 a practical solution for professional equipment racks and commercial AV power management systems.
The housing includes two ECM-3BP blank plates to cover unused module positions, allowing installers to configure the system with fewer than three modules while maintaining a clean, finished appearance.
ECM power conditioning modules are sold separately.
Three-Slot Modular Power Management Design
The AtlasIED ECM-RACEWY3 is designed to accommodate up to three compatible ECM power modules within a single housing.
This modular approach allows installers to build a power management system based on the requirements of the installation.
For example, a system may initially require only one or two power conditioning modules, leaving additional space available for future expansion.
The included blank plates allow unused positions to remain covered until additional modules are installed.
This flexibility makes the ECM-RACEWY3 particularly useful for commercial AV systems where equipment requirements may change over time.
Supports Up to Three Separate 20A Circuits
When equipped with three compatible 20-amp ECM power modules and appropriately wired, the ECM-RACEWY3 can accommodate three separate 20-amp AC circuits.
This provides a potential combined capacity of 60 amps across three independent circuits.
Each circuit remains subject to its individual electrical rating and applicable installation requirements.
The ECM-RACEWY3 does not combine these circuits into a single 60-amp output.
This configuration is useful for professional audio and video installations requiring multiple protected or controlled AC power circuits.
Compatible with AtlasIED ECM Power Modules
The ECM-RACEWY3 is designed to house compatible AtlasIED ECM-series power conditioning modules.
These modules provide the power management and protection functions required by the system.
Depending on the installed module, available functions may include:
-
AC spike and surge suppression
-
EMI/RFI noise filtering
-
Remote power control
-
AC voltage monitoring
-
Power sequencing through compatible control equipment
These functions are provided by the installed modules and associated control equipment—not by the ECM-RACEWY3 housing itself.
This distinction allows installers to select the appropriate ECM modules for the application.
Includes Two ECM-3BP Blank Plates
The AtlasIED ECM-RACEWY3 includes two ECM-3BP blank plates for unused module positions.
These plates help maintain a clean installation when fewer than three ECM modules are installed.
They also allow installers to leave unused module locations covered while planning for future expansion.
This is particularly useful in commercial AV installations where additional power management equipment may be added later.
Durable Black-Painted Construction
The ECM-RACEWY3 features a durable black-painted finish designed to complement professional equipment racks and AV installations.
Its construction provides a dedicated mounting location for compatible ECM power modules.
The housing is designed to support organized installation of multiple power modules within a commercial equipment system.
Breakaway Mounting Tabs for Installation Flexibility
The ECM-RACEWY3 includes breakaway mounting tabs that provide additional installation flexibility.
These tabs allow installers to adapt the housing to supported mounting arrangements.
The raceway is designed to fit most equipment racks with a minimum internal height of 30 inches.
Before installation, verify the available rack dimensions, mounting clearances, and electrical requirements.
All electrical connections should be completed according to AtlasIED installation instructions and applicable electrical codes.
Ideal Applications for the AtlasIED ECM-RACEWY3
The ECM-RACEWY3 is suitable for commercial AV installations requiring multiple ECM power conditioning modules.
Typical applications include:
-
Professional audio equipment racks
-
Commercial AV power management systems
-
Houses of worship
-
Corporate AV installations
-
Educational facilities
-
Commercial paging systems
-
Background music systems
-
Equipment rooms
-
Multi-circuit power conditioning installations
-
ECS-controlled power management systems
Its modular construction makes it useful for installations requiring flexibility, organized module mounting, and future expansion.
AtlasIED ECM-RACEWY3 Key Features
-
Three-slot housing for compatible AtlasIED ECM power modules
-
Accommodates up to three ECM modules
-
Supports installations with three separate 20A circuits
-
Potential combined capacity of 60A across independent circuits
-
Compatible with AtlasIED ECM-20 power conditioning modules
-
Includes two ECM-3BP blank plates
-
Covers unused module positions
-
Durable black-painted finish
-
Breakaway mounting tabs
-
Designed for professional equipment rack installations
-
Fits most racks with at least 30" internal height
-
Supports modular power management system expansion
-
ECM modules sold separately
-
12-month manufacturer warranty
AtlasIED ECM-RACEWY3 Technical Specifications
|
Specification
|
Details
|
|
Manufacturer
|
AtlasIED
|
|
Model
|
ECM-RACEWY3
|
|
Product Type
|
Power Module Housing / Raceway
|
|
Module Capacity
|
Up to 3 Compatible ECM Modules
|
|
Compatible Module Family
|
AtlasIED ECM Series
|
|
Supported Circuit Arrangement
|
Up to 3 Separate 20A Circuits
|
|
Combined Potential Circuit Capacity
|
60A Across 3 Independent Circuits
|
|
Included Accessories
|
2 × ECM-3BP Blank Plates
|
|
Finish
|
Black Painted
|
|
Mounting Features
|
Breakaway Mounting Tabs
|
|
Recommended Rack Clearance
|
Minimum 30" Internal Height
|
|
Height
|
3.0" (7.6cm)
|
|
Depth
|
3.375" (8.5cm)
|
|
Manufacturer Warranty
|
12 Months from Date of Purchase
|
Note: ECM power modules are not included. Electrical capacity depends on the installed modules, wiring, and individual branch circuits.
Why Buy the AtlasIED ECM-RACEWY3 from Audio Supply?
At Audio Supply, we specialize in professional audio equipment and commercial AV power management solutions.
The AtlasIED ECM-RACEWY3 provides a practical way to mount multiple ECM power conditioning modules in one organized housing, making it a useful choice for equipment rooms and commercial AV installations.
Whether you're expanding an existing AtlasIED ECS power management system or planning a new installation, Audio Supply can help you select compatible power conditioning equipment.
Need a Compatible Power Conditioner?
The AtlasIED ECM-20 20A Power Conditioner and AC Spike Suppressor is designed for use with compatible AtlasIED ECM module housings, including the ECM-RACEWY3.
The ECM-20 provides surge suppression, EMI/RFI filtering, and remote power management capabilities when integrated with compatible ECS control equipment.
ECM-20 modules are sold separately.
